Articolo in rivista, 2023, ENG, 10.3390/ membranes13040399

Fabrication of a Zircon Microfiltration Membrane for Culture Medium Sterilization

Z. Khebli, F. Bouzerara, N. Brihi, A. Figoli, F. Russo, F. Galiano, S. Chahredine

Laboratory of Condensed Matter Physics and Nanomaterials, Jijel University, Jijel 18000, Algeria Institute on Membrane Technology, ITM-CNR, Via P. Bucci, Cubo 17/C, 87030 Rende, Italy Biotechnology, Environment and Health Laboratory, Jijel University, Jijel 18000, Algeria

Multilayer ceramic membranes to be used for bacteria removal by filtration were prepared from ceramic materials. They consist of a macro-porous carrier, an intermediate layer and a thin separation layer at the top. Tubular and flat disc supports were prepared from silica sand and calcite (natural raw materials), using extrusion and uniaxial pressing methods, respectively. Making use of the slip casting technique, the silica sand intermediate layer and the zircon top-layer were deposited on the supports, in this order. The particle size and the sintering temperature for each layer were optimized to achieve a suitable pore size for the deposition of the next layer. Morphology, microstructures, pore characteristics, strength and permeability were also studied. Filtration tests were conducted to optimize the permeation performance of the membrane. Experimental results show that the total porosity and average pore size of the porous ceramic supports sintered at different temperatures within the range (1150-1300 °C), and lie in the ranges of 44-52% and 5-30 ?m, respectively. For the ZrSiO4 top-layer, after firing at 1190 °C, a typical average pore size of about 0.3 ?m and a thickness of about 70 ?m were measured, while water permeability is estimated to a value of 440 lh-1m-2bar-1. Finally, the optimized membranes were tested in the sterilization of a culture medium. Filtration results show the efficiency of the zircon-deposited membranes for bacteria removal; indeed, the growth medium was found to be free of all microorganisms.

Membranes (Basel) 13 (399)

Keywords

ceramic membrane, support, microfiltration, bacteria removal, zircon

CNR authors

Russo Francesca, Figoli Alberto, Galiano Francesco

CNR institutes

ITM – Istituto per la tecnologia delle membrane

ID: 479810

Year: 2023

Type: Articolo in rivista

Creation: 2023-03-31 15:26:11.000

Last update: 2023-04-08 20:03:09.000

External links

OAI-PMH: Dublin Core

OAI-PMH: Mods

OAI-PMH: RDF

DOI: 10.3390/ membranes13040399

External IDs

CNR OAI-PMH: oai:it.cnr:prodotti:479810

DOI: 10.3390/ membranes13040399